I wasn’t happy with any of the motor mounts I found for an FE (the type of Ford engine I’m using) and the Factory Five. I want very little rotational movement from the engine and essentially no fore/aft movement. This is because the engine is tight in the engine bay and there are a few things (bellhousing, etc.) that will hit the frame or other things if the engine moves much.
So, I opted to make mounts. They’re made out of 3/16″ mild steel plate. The tube is DOM steel and there are polyurethane bushings, not shown in the photo. The bushings are basically standard suspension parts so they’re cheap and plentiful.